3D Printer Parts Clone Duet 2 Maestro Advanced 32 Bit Electronics Board Motherboard with 5 Inch PanelDue 5i Integrated Paneldue Colour TouchScreen Controller for 3D Printer ( Item#: OS3019 )

Features:
--Duet 2 Maestro
The Duet 2 Maestro is an advanced 32 bit electronics board for the control of 3D printers and other CNC machines. It is in the same product family as the Duet 2 Wifi and Duet Ethernet, and it runs the same advanced and flexible RepRapFirmware. The main difference is that the Duet 2 Maestro has lower current stepper motor drivers and less expandability than the Duet 2 Wifi and Ethernet, and it only comes in an Ethernet option.In summary:
Powerful 32-bit processor. Dedicated ethernet module.
Super quiet TMC2224 stepper drivers, up to 256 microstepping.
High speed SD card and support for a second SD external card if required.
Three heater channels for a heated bed and two extruder heaters.
Support for Thermistors and PT1000 sensors wired direct to the Maestro, along with Duet3D PT100 and Thermocouple daughterboards.
Power rating: Each stepper driver is capable of up to 1.6A peak motor current. The bed heater channel is specifically designed for high current.
Connect via PC, tablet or smartphone on the same network to the on board web interface.
Setup your printer and update the firmware through the web interface.
All common 3D printer geometries are supported.
Expandable up to 4 extruders with firmware support for mixing hotends and remapping axes to use 2 high power external drivers.
Support for the PanelDue: a full colour graphic touchscreen. Support for a low cost 12864 display.
Support for a low cost 12864 display.
Provided with Molex compatible plugs and crimps as well as spade connectors for power input.

--PanelDue 5i Touchscreen
The PanelDue 5i is a color touchscreen controllers for Duet and other 3D-printing electronics that support it. This integrated version is made to order high quality 5 inch TFT LCD Panel with a leading manufacturer.
Features:
Resolution 800 * 480 pixels on 5 inch LCD.
5 V power supply from 3D host printer driver.
2-wire asynchronous serial interface with 3.3 V signal level (5V input tolerance).
Connections to the onboard card socket as well as the PanelDue serial and power connections are all available via a 10-way ribbon cable. A 300mm long ribbon cable (maximum recommended length) is supplied.
4-wire cable for connecting PanelDue to the controller board for serial and power supply. This cable is also supplied.

Specifications:
Package Size: 25.1 * 15.0 * 4.0cm / 9.9 * 5.9 * 1.6in
Package Weight: 342g / 12.1oz

Notes:
The measurement allowed error is +/- 1-3cm.
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

Packing List:
1 * Duet 2 Maestro Board
1 * Paneldue Screen-integrated
1 * 4pin Cable
1 * 10pin Flat Cable
1 * USB Cable
1 * Gadget
5 * Heat Sink
8 * Jumper Cap(Generally more than 8pcs)