Smart Backlit Digital Temperature Controller LCD Screen APP Control Auto Heating Cooling Power-off Programmable Smart Wi-Fi Thermostats Timer with Sensor Probe for Home Reptile Incubator Greenhouse ( Item#: H48122EU )

Features:
【Multifunctional Thermostat Timer】Comes with 1M/3.3FT temperature sensor probe, supporting heating/cooling, remote turn on/off(one device), temperature calibration, screen flip and reset function, ect.

【APP Control Auto Temperature Control】Smart thermostat outlet can be connected via Wi-Fi and controlled by smart phone. The range for temperature controller is -20~120 °C(-4℉~248℉), set the start and stop temperature to control the heating or cooling equipment.

【Backlight LCD Display】The high-definition 2.4-inch LCD screen with backlight clearly displays the set temperature and measured temperature at day and night.

【4 Timing Modes】Programmable thermostat supports cycle timing control mode, countdown on mode, countdown off mode and timing switching mode. Supports Celsius and Fahrenheit. 

【Multiple Safety Protection】Digital thermostat supports automatic power-off for overvoltage, overcurrent and overpower. It can intelligent judgment and automatic power-off based on the recharge power value after the device is fully charged and the lowest power value when it is turned on and run.

【Easy to Use and Wide Apply】This temperature controller is plug and play, widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fermentation, heat mat, and other home and and industrial application.

Note:
1. Do not place the probe in fire
2. Do not place the probe in water
3. Only support 2.4GHz Wi-Fi  (IEEE 802.11b/g/n support)

Specification:
Main Material: ABS
Plug: US plug / EU plug (optional)
Voltage: 85-265VAC VAC, 50/60 Hz
Current: 10A
Maximum current: 16A
Power: 1200W (120VAC) / 2200W (220VAC)
Maximum output: 3680W (230VAC)
Humidity measurement range: 1 ~ 99% RH
Temperature measurement range: -20 ~ 120 °C
Power range: 0-99999Kwh
Measurement accuracy: 1%
Power factor: 0-1.00PF
Working temperature: -10~60℃
Product size: 133 * 76 * 73mm / 5.2 * 2.9 * 2.8in
Product weight: 200g / 7oz

Packing List:
1 * Temperature controller
1 * 1m Probe
1 * Power adapter
1 * Manual