UNI-T UT25CL Cable Detector in the Wall Electric Scanner Underground Cable Locator Wire Tracker Professional Hidden Lines Finder ( Item#: E25980 )

UT25CL Handheld cable locator can be used to detect the path of low-voltage cables buried in ground (such as cabling inside wall); test and diagnose opens, shorts and other problems occurring at cabling; and detect if the tested cable is energized. The transmitter can display corresponding voltages (voltage of energized cable: ≥8V), and the receiver can simultaneously display the signal strength, transmitter code, transmitter power level, low battery, etc. UT25CL has multiple advantages including accurate measurement, easy operation, visualized display, and more, making it an ideal tool for low-voltage cabling engineering, engineering and maintenance of metal conductors, etc.

Features:
Multiple Coding Signals Available: Transmitter has eight encoding signals to choose from; Multiple transmitters can be tested simultaneously using different codes, and one receiver can support up to 8 transmitters for signal reception.
Signal Strength Adjustable: Emiter: Adjustable signal strength in three levels, helps to avoid false signals causing misreading and prevents strong signals from covering too large an area and causing receiver oversaturation.
Multi Level Sensitivity Adjustable: Receiver can be set to automatic or manual detection mode, sensitivity can be adjusted in manual mode.
Voltage Measurement and ELV Function (Emitter only): Voltage measurement function, range 8-480V AC/DC (50/60Hz), and can recognize the polarity of DC voltage. The ELV function can light up the ELV indicator light when the port is connected to a voltage greater than 25V without turning on the device.
Non Contact NCV Function (Receiver Only): The NCV (non-contact electrical verification) mode is used to verity whether the cable is live or to track the cable without using the transmitter.
Flashlight and Backlight Function (Receiver only): Turning on the flashlight and backlight during use in the dark or dark environment can facilitate line finding.

Specifications:
Model: UT25CL
Material: ABS
Transmitter
Working Frequency: 33kHz
Identification Range of External Voltage: 8~480V
Identification Frequency of External Voltage: DC/AC: 50-60Hz
Measurement Accuracy of External Voltage: 2.5%±3deg
Strength of External Overvoltage: 480V DC/AC
Overvoltage Rating: CAT III 480V
Pollution Degree: 2
Display: Segmented LCD (TN translucent)
Battery: 6 * 1.5V AA (LR06) (Not included)
Power Consumption: 165mA (including backlight, output short circuit, Ill, CODE5)
Fuse: F0.6A 600V
Operating Temperature: 0 ~40℃; Max. 80%RH (Non-condensing)
Storage Temperature: -20~60C; Max. 80%RH (Non-condensing)
Operating Altitude: ≤2000m
Transmitter Size: 189 * 96 * 48mm / 7.44 * 3.78 * 1.89in
Transmitter Weight: 534g / 1.17lb
Drop Proof: 1m
Button Life: 10000 times
Backlight: Supported (white)
CODE (Code value): 0,1,2,3,4,5,6 and 7.
                                Default code: 5
Level of Signal Strength: 1, 2 and 3
                                        Default level: 3
Single Pole Testing: Supported (Support testing in energized condition; Maximum 480V)
Dual Pole Testing: Supported (Support testing in energized condition; Maximum 480V)
ELV Indicator Light: 
1. Without batteries: If external voltage applied is >25V, the ELV LED emits weak light and its brightness increases as voltage rises (light up constantly), otherwise, the ELV LED emits weak light or lights off.
2. UT25CL-T is in power-on state with batteries installed: the ELV LED lights off
3. UT25CL-T is in power-off state with batteries installed: If external voltage applied is >25V, the ELV LED emits weak light and its brightness increases as voltage rises (light up constantly), otherwise, the ELV LED emits weak light or lights off.
Certification: CE Certified
                      EMC: EN IEC 61326-1
                      LVD: EN 61010-1
                      EN IEC 61010-2-033
                      Rohs
Receiver
Working Frequency: 33kHz
Locating Depth: Related to the medium and the method used
Tracking Mode for Single Pole: About 0~2.5m (Use separate loop wire for 2.5m)
Tracking Mode for Dual Poles: About 0~0.5m
Grid Voltage Identification: About 0~0.4m
NCV: Voltage identification range: 80~1000V, 50Hz/60Hz (Approach the measured cable)
Display: Segmented LCD (TN translucent)
Battery: 6 * 1.5V AAA (LR03) (Not included)
Power Consumption: About 30mA (Excluding backlight and flashlight)
                                  About 65mA (Excluding backlight)
                                  Maximum 95mA (including backlight)
Operating Temperature: 0~40C; Max. 80%RH (Non-condensing)
Storage Temperature: -20~60℃; Max. 80%RH (Non-condensing)
Operating Altitude: ≤2000m
Receiver Size: 226 * 68 * 38mm / 8.89 * 2.67 * 1.49in
Receiver Weight: 361g / 0.79lb
Button Life: 10000 times
Indication for Running Out of Power (For transmitter): Supported
Backlight: Supported
Flashlight: Supported
CODE (code value): 0, 1, 2, 3, 4, 5, 6 and 7
Levels of Signal Strength of Transmitter: Level 1, Level 2, and Level 3
Reception Sensitivity (Manual Adjustment): Including 9 levels
Index Range of Signal Strength: 0~999
Analog Bar Range of Signal Strength: 0~43
Receive Multiple Transmission Signals: Supported (A receiver can receive signals generated by maximum 8 transmitters at the same time)
Certification: CE Certified
                     EMC: ENIEC 61326-1
                     LVD: EN 61010-1
                     EN IEC 61010-2-033
                     RoHS
Indoor Use: Supported
Package Weight: 2313g / 5.09lb
Package Size: 35 * 26 * 11cm / 13.77 * 10.24 * 4.33in

Package List:
1 * Transmitter
1 * Receiver
2 * Alligator Clips (Red + Black)
2 * Dual Inline Test Leads (Red + Black)
2 * Connected Probe (Red + Black)
1 * AC Polarity Plug Cord
1 * Auxiliary Grounding Spike
1 * Tool Bag
1 * User Manual (English)