Hantek 2 in 1 Handheld Digital Oscilloscope + Multimeter Dual-channel 2 Channels USB Scopemeter Portable Oscope Meter 40MHz Bandwidth 250MSa/s Sample Rate 2C42 TFT LCD Display Test Meter ( Item#: E23413EU )

This all-new handheld oscilloscope is really practical for use with a new generation of 2 in 1 multifunction tester: oscilloscope and multimeter. Its sampling rate is 250MSa/s and its bandwidth is 40MHz. Support multi-angle adjustment, ultra-low-power, Type C charging interface, each 2 hours battery charge allows working one full day or standby two months. Output sine, square, triangle, trapezoidal and other waveforms output.

Features:
2-in-1 Oscilloscope + Multimeter: This multi-purpose oscilloscope owns 2 universal test instrument functions. Necessary helper for an engineer.
Intelligent Charging Control: 5V/2A large current or USB port of ordinary computer can be charged, easy to use, very convenient and handy with AUTO one-key test.
Ultra-low Power Design: Type C charging interface, and standby for 2 months after every recharge of 2 hours with large capacity replaceable lithium batteries power supply.
Universal Multimeter Function: Test voltage, current, resistance, diode, capacitance, continuity.
5V/2A Charger + Type C Charging Cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone.

Small In Size & Held In Single Hand: The 45 degree suspension bracket design provides you a work station anywhere anytime.
One Key Export Out & Quick Comparison: 2 groups of reference waveform + 6 groups of waveform storage, simple and effective.
Digital Voltmeter Function: Automatic frequency and amplitude measurement, convenient to use and it supports Chinese & English menu display.
With Cursor Measurement Function: Supports time and voltage manual measurement, and measure the required waveform accurately.
Color LCD Screen: Exquisite and smooth lines make the waveform clear and undistorted when magnify with minimalist keyboard design simplify operation.
Unibody Casing: Fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble.
Self Calibration Function: Free from level drift after long time unused.
Scan Code for Video Help Function: Scan code on back of machine to get help of online video help.

Specifications:
Battery Charger Plug Type: US / EU (Optional)
Bandwidth: 40MHz
Power Supply: AC 110-240V 50/60Hz
Display: Full Color TFT LCD Display(320*240 pixels)
Channel: 2CH + DMM
Horizontal:
Sampling Rate Range: 250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform Interpolation: (sin x)/x
Record Length: Max. 6K when single-channel, 3K each channel when dual-channel
SEC/DIV Range: 5ns/div～500s/div 1, 2, 5 step-by-step
Vertical:
A/D Converter: 8-bit resolution,each channel sampled simultaneously
VOLTS/DIV Range 10mV/div～10V/divat input BNC
Bandwidth Limit, Typical: 20MHz
Low Frequency Response (-3db): ≤10Hz at BNC
Rise Time at BNC, Typical: ≤5ns
Vertical Gain Accuracy: ±3% for Normal or Average acquisition mode
Note: Bandwidth reduced to 6MHz when using a 1X probe.
Power Supply: 2 * Built-in 3.7V 2600mAh Battery
Product Size: 199 * 98 * 40mm / 7.8 * 3.9 * 1.6in
Product Weight: 640g / 22.6oz
Package Size: 25 * 19 * 10cm / 9.8 * 7.5 * 3.9in
Package Weight: Approx. 1314g / 46.4oz

Package List:
1 * 2-in-1 Oscilloscope
1 * Clip Probe
1 * Test Probe
1 * Power Adapter
1 * USB Charging Cable
1 * Multimeter Probe
1 * Storage Bag

Model	Hantek2C42
Oscilloscope Mode
Bandwidth	40MHz
Channel	2CH+DMM
Horizontal
Sample Rate Range	250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform Interpolation	(sin x)/x
Record Length	Max. 6K for single-channel; 3K samples per dual-channel
SEC/DIV Range	5ns/div~500s/div  1, 2, 5 sequence
Vertical
A/D Converter	8-bit resolution,each channel sampled simultaneously
VOLTS/DIV Range	10mV/div~10V/divat input BNC
Bandwidth Limit, typical	20MHz
Low Frequency Response (-3db)	≤10Hz at BNC
Rise Time at BNC, typical	≤5ns
Vertical Gain Accuracy	±3% for Normal or Average acquisition mode
Note: Bandwidth reduced to 6MHz when using a 1X probe.
Acquisition
Acquisition Modes	Normal
Trigger
Type	Edge
Mode	Auto, Normal, single
Level	±4 divisions from center of screen
Trigger Level Accuracy	0.2div × volts/div within ±4 divisions from center of screen
Slope	Rising, Falling, Rising & Falling
Source	CH1/CH2
Input
Coupling	DC, AC or GND
Input Impedance,	25pF±3 pF, 1MΩ±2%
DC coupled
Probe Attenuation	1X, 10X
Supported Probe Attenuation Factors	1X, 10X, 100X, 1000X
Maximum Input Voltage	150VRMS
Measurement
Cursor	Voltage difference between cursors: △V
	Time difference between cursors: △T
Automatic Measurements	Frequency, Amplitude
DMM
Maximum Resolution	4000 Counts
DMM Testing Modes	Voltage,Current,Resistance,Capacitance,Diode &On-Off
Maximum Input Voltage	AC:600V, DC: 800V
Maximum Input Current	AC: 10A, DC:10A
Input Impedance	10MΩ
Measurement Term	Range	Accuracy	Resolution
DC Voltage	400.00mV	± (0.8% + 5)	100uV
	4.000V		1mV
	40.00V		10mV
	400.0V		100mV
	600.0V	± (1% + 2)	1V
	Overload conservation: 400mV: 250V, other: 600Vrms.
AC Voltage	4.000V	± (1.2% + 5)	1mV
	40.00V		10mV
	400.0V		100mV
	600.0V	±(1.5% + 5)	1V
	Frequency: 40Hz~400Hz;
	Frequency of 400V and 600V: 40Hz~100Hz
DC Current	40.00mA	± (1% + 2)	10uA
	200.0mA	± (1.5% + 2)	100uA
	4.000A	± (1.8% + 2)	1mA
	10.00A	± (3% + 2)	10mA
	Overload conservation:
	self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
AC Current	40.00mA	± (1.3% + 2)	10uA
	400.0mA	± (1.8% + 2)	100uA
	4.000A	± (2% + 3)	1mA
	10.00A	± (3% + 5)	10mA
	Frequency: 40Hz~400Hz;
	self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
Resistance	400.0Ω	±(1% + 3)	0.1Ω
	4.000KΩ	±(1.2% + 5)	1Ω
	60.00KΩ		10Ω
	400.0KΩ		100Ω
	4.000MΩ		1KΩ
	40.00MΩ	± (1.5%±3)	10KΩ
	Overload conservation: 220Vrms
Capacitance	40.00nF	±(3% + 5)	10pF
	400.0nF		100pF
	4.000uF		1nF
	40.00uF		10nF
	100.0uF		100nF
	Overload conservation: 220Vrms
Diode	0V~2.0V
On-Off	<50Ω
General Specifications
Display
Display Type	2.8 inch64K color TFT
Display Resolution	320 horizontal by 240 vertical pixels
Display Contrast	Adjustable
Power Supply
Supply Voltage	100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
Power Consumption	<2.5W
Fuse	T, 3A
Battery	2600mA*2
Environmental
Operating Temperature	0~50 °C (32~122 °F)
Storage Temperature	-40~+71 °C (-40~159.8 °F)
Humidity	≤+104℉(≤+40°C): ≤90% relative humidity
	106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling Method	Convection
Altitude	Operating and	3,000m (10,000 feet)
	Nonoperating
Mechanical Shock	Random Vibration	0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis
	Nonoperating	2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis
	Operating	50g, 11ms, half sine