150W 20A Adjustable Constant Current Electronic Load 2.4inch TFT Color Display 4 Working Modes USB Lithium Battery Capacity Monitor Tester Discharge Meter ( Item#: E23159 )

This product is a direct current electronic load, with a maximum power of 150W and a maximum load current of 20A. 2.4inch TFT color screen, with four working modes design, constant current mode, constant voltage mode, constant power mode and constant resistance mode. Voltage, current and power overrun protections can be set; stop discharge voltage and discharge time can be set. Multifunctional design, the system menu interface supports switching between English and Chinese, zeroing of accumulated data, zeroing of voltage and current at no load, voltage calibration and current calibration, standby time setting, and restoration of factory settings.

Features:
This product is a direct current electronic load, with a maximum power of 150W and a maximum load current of 20A. Support test the capacity of power battery.
2.4inch TFT color screen, with voltage, current, power, electricity, capacity, internal resistance, load, operating mode, OVP, OCP, OPP, stop voltage, time limit discharge display function.
It has four working modes design, constant current mode, constant voltage mode, constant power mode and constant resistance mode.
Voltage, current and power overrun protections can be set; stop discharge voltage and discharge time can be set.
Power supplying temperature can be monitored by an external NTC sensor.
Multifunctional design, the system menu interface supports switching between English and Chinese, zeroing of accumulated data, zeroing of voltage and current at no load, voltage calibration and current calibration, standby time setting, and restoration of factory settings.
The product works with a 12.0V1A independent power supplys and is equipped with an integrated silent (20±3dBA) alloy heat sink, with an intelligent temperature control system controlling the work of the heat sink fan.
Compared to traditional analogue electronic loads, it adopts protects first and then work mode to control the discharge, which can effectively protects the discharge power supplys from damage caused by over-limit and over-discharge.
It adopts four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, making the voltage measurement more accurate, the four-wire system is downward compatible with the two-wire connection method, when wiring, you only need to make the A+ and V+, V- and A- respectively short connection.

Specifications: 
Name: Electronic Load
Material: printed circuit board
Load type: electronic load
Working voltage: 12VDC with 12 V, 1A power adapter
Load voltage: 0-150VDC
Load current: 0-20A
Load power: 0-150W (max. 60W above 120V)
Wiring method: A+ V+ V- A- four-wire system, downward compatible with two-wire system
Maximum power measurement: 999.999Wh
Maximum capacity measurement: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protecting: supports up to 150V overvoltage protections
Overcurrent protecting: supports up to 20A overcurrent protections
Over-power protecting: supports up to 150W over-power protections
Limited voltage discharge: also called low voltage protections, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: support up to 99 hours: 59 minutes time limit discharge
Heat sink: Alloy integrated silent heat sink, internal temperature ≥40°C or current ＞3A automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display temperature from 0-100°C
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current no-load nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: Support
PC software online: Not supported
Restore factory settings: Support
Item size: 165 * 95 * 80mm / 6.50 * 3.74 * 3.15in
Item weight: 400g / 0.88lb
Package size: 195 * 105 * 135mm / 7.68 * 4.13 * 5.31in
Package weight: 625g / 1.38lb

Packing List:
1 * Electronic Load
1 * Adapter
1 * NTC Sensor