Favorites
Swiitol E24 Pro 24W Integrated Structure Laser Engraver with 400x400mm Honeycomb Working Table and R3 Pro Roller and CR1 Control Terminal and Air Assist Kit

Swiitol E24 Pro 24W Integrated Structure Laser Engraver with 400x400mm Honeycomb Working Table and R3 Pro Roller and CR1 Control Terminal and Air Assist Kit

36000mm/min High Speed Engraving 365*305mm Work Area Tank Chain Binding for Stable Work Support Offline Engraving Eyes conservation Suitable for Wood Metal Leather Black Acrylic

Be the first to review this item | Brand: swiitol (0)

Share:

Ship From:

  • Germany Warehouse

Dispatch:Usually will be shipped inbusiness dayshours

Shipping: Loading...
Sorry, it seems that there are no available shipping methods for your location.Please contact us for further assistance.

Loading...

Ship to

Anguilla
: china

type:

QTY:

Wholesale Inquiry

Special discount has ended

Please note each user for only 1 item(s)

Buyer Protection

  • Full Refund If you don't receive your order
  • Full or Partial Refund , If the item is not as described Learn more >
Features:
♦ Integrated Structure Laser Engraver: The overall frame of Swiitol E24 Pro is made of aluminum alloy and can be used out of the box without installation.
♦ Second-generation blue laser packaging process: Swiitol E24Pro laser adopts the second-generation packaging process, which further compresses the laser spot and significantly improves cutting capabilities. It also improves the heat dissipation efficiency of high-power lasers and extends the service life of lasers;
♦ Upgraded compressed spot coupling technology: ultra-fine laser focus area reduced to 0.06x0.06mm, high-density laser can easily cut 17mm thick Basswood, 15mm thick black acrylic (multiple cuts); can directly engrave mirror stainless steel metal, ceramics, glass, engraving & cutting speed 40% higher than the ordinary model,
♦ More stable and high-speed structure: The bottom frame of Swiitol E24 Pro is formed in one piece, and the X-axis metal adopts a double-axis guide rail structure to work with small vibration, ensuring that the machine does not shake when running at a high speed of 36000mm/Min;
♦ Tank chain binding: To make the machine more beautiful and the structure more stable, Swiitol E24 Pro adopts the tank chain wire binding scheme. The wire harness runs smoothly without entanglement and improves the wire life.
♦ Cross positioning: The laser is equipped with a red light cross positioning module as standard, which can position the engraving range faster and more accurately and determine the flatness of the material.
♦ New non-clogging laser: The new laser has a built-in tool-free focusing module and a built-in air assist system, without wire interference, simple and beautiful. There is also a patented double-layer wind collecting cover design, which can ensure long-term use without clogging or contaminating the lens, greatly extending the life of the laser.
♦ Brand new 32-bit motherboard: The most intelligent motherboard, with faster data reception and processing capabilities, optional accessories to enable autofocus and resume carving after power off. Sinking cutting and other functions.
♦ Mobile APP: The APP BURNLAB is now available in major Android application markets and iOS system (you can also scan the QR code of the manual to download). It is small and multi-functional, bringing a new control experience. Come and give it a try.
♦ New filter eye conservation design: The panoramic filter protector protects your eyes very well, filtering 97% of ultraviolet light. You and the people around you do not need to wear goggles to watch laser engraving. Reduce your goggle expense and inconvenience of wearing goggles.
♦ Broad compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL and LightBurn, and supports Win XP/Win 7/Win 8/XP/Win 10. It also supports MAc system (LightBurn) and engraving file formats. Support NC, BMP, JPG, PNG, DXF, etc.
♦ Safety conservation: It is equipped with an emergency stop button. If an unexpected situation occurs, the machine can be stopped at any time. It is also equipped with a reset switch and a limit switch to make engraving safer.
♦ Rich accessories: According to different needs, honeycomb panels, air assists, rollers, claw plates, conveyor belts, air purifiers and other accessories can be purchased (need to be purchased separately)

Necessary Accessories for Laser Cutting:With this accessory to cut wood, acrylic and other materials, the edges of the wood are neat and clean, not easy to be yellowed by smoke, and you can get a clean cutting work. 400x400mm working area is suitable for most popular laser engraving machines, maximize the cutting area.
Observable Design:When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Easier to judge whether cutting through. You don’t need to calculate the number of cuts, just keep repeating cutting until the bottom glows, which means the material has been cut through.
Safe Metal Desktop conservation Board:All made of metal, processed by high-precision CNC, solid structure not easy to deform, and high flatness. And equipped with a metal desktop conservation board, which can protect the table from laser damage.
Square Measuring Ruler:X-axis and Y-axis contain precise scale lines to form a right-angle measuring ruler, which is convenient for you to measure the size of cutting objects quickly.
Wide Compatibility:Compatible with various mature laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine.

Upgraded Roller: With a support frame, the R3 PRO roller adds a support post to sculpt irregular prototype bodies such as goblet,baseball bat.
The diameter can be adjusted in 8 steps, and the engraving diameter can be as small as 4mm. No installation, no adjustment, ready to use after unpacking.
The roller made of One-piece rubber, hardness up to 70A and with strong friction, and when carving can fix the object, and is not limited by the length of the object.
Concentric design, adjustment-free synchronising belt,and the motor is not exposed, safer.
Compatible with ATOMSTACK, NEJE, Ortur,Twotrees,etc. and applicable to 95% of engraving machines on the market.

This CR1 control panel is suitable for second generation laser engraving machinesATOMSTACK A6 Pro/A12 Pro/A24 Pro, and compatible with Swiitol E6 Pro/ E18 Pro/ E24 Pro as well.
3.5inches touchscreen design, easy to operate and clear to check the status of the engraver.
With this Controller, you can have real-time control over your engraving machine without the need for a computer or mobile phone connection.
Easy to install this control monitor to your laser engraving and cutting machine.

Suitable for ATOMSTACK laser engraver such as A5 10W, A5 20W, A5 30W, A5 Pro, A5 Pro+, Atomstack Pro+,  A5 M40, A5 M50, A5 M50 Pro, X7, X7 Pro, S10 Pro, A10 PRO, P7 M40, P9 M40, P9 M50.
Equipped with 10-30L/min adjustable airflow, can effectively remove the smoke and dust generated in the process of laser cutting/engraving, prevent the smoke and dust from causing laser energy attenuation, ensure the stability of laser energy, and make your engraving / engraving Cut pieces for best results.
ATOMSTACK air-assisted accessories, powerful airflow can quickly reduce the surface temperature of the cutting/engraving object, prevent excessive burning, and make the cutting edge cleaner and smoother.
Only 60dB noise is generated during the working process, which is similar to the volume of household electric fans when working, giving you a quiet laser engraving and cutting environment.
Easy to install and use, no need to buy additional accessories, just two steps to install and use.

Specification:
Model: E24 PRO
Engraving ruler: 365x305mm
Machine Electric power: 130W
Laser Electric power: 90W
Laser output optical power: 24W
Laser wave: 455 ±5 nm
Engraving accuracy: 0.02mm
Net weight of equipment:  8.5kg
Max Engraving Speed: 36000mm/Min
Data transmission type: USB connection
Focusing type: fixed focus laser, no focusing
Spot size: 0.06x0.06mm
Operating software: LaserGRBL, LightBurn for with Win XP/Win 7/Win 8/XP/Win 10 system
APP: BURNLAB compatible with iOS and Android
Carving materials: Basswood, pine, paulownia, plywood, yellow peach, mahogany, density board, kraft paper, non-transparent acrylic board, resin, rock board, ceramics, leaves, bamboo, cardboard, plastic, leather, PCB version, alumina, non-reflective Electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting materials: Kraft paper, hardwood, Paulownia, basswood, pine, softwood, bamboo chips less than 3MM, low-density foam board, non-transparent acrylic board, ABS, PP and other boards less than 3MM thick, cardboard, non-woven fabrics, wooden boards, acrylic, some thin plastic board, sponge;
Supported file formats: NC, BMP, JPG, PNG, DXF
Power supply: 100-240V AC, 50/60HZ Output: 12V 5A

Material: High-strength Steel
Product Size: 400x400mm
Product Thickness: 22mm
Diameter of Honeycomb Mesh: 9mm

Model: R3 PRO
Power: 24W
Dimensions: 260x90x100mm
Material: Aluminum alloy, 303 stainless steel, iron, silicone,plastic
Applicable models: Compatible with 95% of laser engraving machines on the market. Including ATOMSTACK, Ortur, NEJE, Twotresss, etc.

For:  ATOMSTACK A6 Pro/A12 Pro/A24 Pro and Swiitol E6 Pro/ E18 Pro/ E24 Pro 
Screen Size: 3.5"

For: ATOMSTACK A5 10W, A5 20W, A5 30W, A5 Pro, A5 Pro+, Atomstack Pro+,  A5 M40, A5 M50, A5 M50 Pro, X7,  X7 Pro, S10 Pro,  A10 PRO,  P7 M40,  P9 M40,  P9 M50.
Parameter: 10-30L/Min (Adjustable airflow speed)
Noise decibel: 60dB

Precautions:
●Please read the user manual carefully before operating the laser engraving machine.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed properly, you need to wear goggles.
●Do not touch the laser with your hands, otherwise your hands may be burned.
●Please avoid strong impact on the machine.
●Children under 14 years old are prohibited from using this product. Children over 14 years old require adult supervision.
●The laser cannot be applied directly to any specular reflective object, which may cause injury to the operator or burn the laser.

Packing List:
1 x Laser Engraver
8 x Wire anchor
8 x Cable clamp
1 x WIFI antenna
1 x Fixed focus lens
1 x Flash drive
1 x H3 hexagon L-shaped wrench
2 x M4 thumb screw
1 x Slider
1 x Switch key
1 x One- to-two TYPE C cable
1 x Power cable
1 x Silicone hose (air hose)
1 x Goggles
1 x 100*30 lint-free cloth
4 x (M4*6)
1 x User manual

1 x SCULPFUN honeycomb panel
1 x 400x400mm metal desktop conservation board

1 x Roller Axis of Rotation
4 x Auxiliary Heightening Columns
2 x Auxiliary Support Shaft
1 x Support Frame

1 x  CR1 Control Terminal

Fixing Screw * 4
Fixed Cable Tie * 4
Hexagon Wrench * 1
Air Pump For Laser Work * 1
2 Meters Of Air Pipe * 1
Dedicated Replacement Filter Acrylic Set * 1
Modified Wind Hood * 2
 
Customer Reviews

There are no customer reviews yet.

  • 5 stars
  • 4 stars
  • 3 stars
  • 2 stars
  • 1 stars

Share your thoughts with other customers and get Cafago Points, the first 5 reviews get DOUBLE Cafago Points!

Write a Customer Review
Be the first to review this item

Top Sellers More

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

cafago use cookies to give you the best shopping experience. If you continue to use our services or create a new account, we will assume that you agree to our  Privacy Policy.
Click here to reject the cookies