SCULPFUN S10 10W Laser Engraver with Air Assist Pump and Y-axis Rotary Roller ( Item#: C-OS0358-1 )

Features:
10W laser Beam Shaping Technology: The S10 laser output power is increased to 10W, which is twice that of the S9.  But S10 obtains the same ultra-thin laser beam with 0.08mm focus as S9, which means S10 has higher energy density, stronger cutting penetration and engraving capabilities.
Powerful High-speed Air Assist: Equipped with a high-speed air assist nozzle. Advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency.
Industrial-grade Cutting Accuracy: S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear.
More Advanced and Upgradable 32-bit Motherboard: The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL.
Square Measuring Ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x400mm large-area engraving interval can meet your various engraving needs.
Detachable Laser Shield & Safe Design: Equipped with a detachable eye shield, which will not dazzle even without glasses. And if you don't need it, you can easily disassemble the eye shield. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable. And the free A4 size steel pad can protect the table from laser damage, isolate fire hazards.

Great Air Pump: SCULPFUN 30L/min air pump is very suitable for air-assisted laser engraving machine, perfectly suitable for SCULPFUN S10 or other similar air-assisted laser engraving machines.
High Durability: This air pump has been produced and sold in the market for more than 10 years. After long-term testing and verification, it has extremely reliable function and stability.
Adjustable Speed: The air pump has a speed control design, you can adjust the flow rate from 0-30L/Min by rotating the regulator, and adjust the airflow speed according to the needs of the laser engraving machine.
Low Noise and Low Vibration: Upgraded silent design, the internal structure of the machine and the external anti-vibration feet greatly reduce noise or vibration, providing a quiet working environment of less than 40dB.
Stable Air Pressure Output: High stability design, it can maintain a stable air output even if it has been working for a long time. 

Pre-assembled for Plug&Play:The machine is 100% installed in the package, equipped with an adapter cable, and only needs to be connected to the Y-axis  wiring of the laser engraving machine to engrave Cylindrical objects, such as pens, water bottle, etc.
Large Engraving Space & 4 Raising Feet:SCULPFUN roller base design is lower and stable, and equipped with 4 sturdy metal raising feet, so that it has a larger engraving diameter of 6-150mm, which can meet more engravings need. Metal feet are more solid than plastic feet, and the machine is more stable when engraving.
Sliding Space Adjustment:Adjusts the size of the space between the 2 rubber rollers by sliding, and fixes the roller by hand screw, which is simpler and faster than the traditional multi-stage fixing hole adjustment.
100% Scale High-precision Engraving:Our roller adopts high friction 70A rubber shaft to prevent slipping, and the linear speed of the rotating surface has been precisely calculated. Directly plug in the engraving machine cable to engrave the image in 100% scale. Does not enlarge or reduce the image.
Wide Compatibility:The roller is suitable for multiple engraving software such as lightburn or laserGRBL, and it can be used directly, no need to set parameters in software. In addition, it can be applied to 95% of the engraving machines on the market such as SCULPFUN, NEJE, Ortur, ATOMSTACK, etc.


Specification:
Model: S10
Diode Laser Output Power: 10W (Note This Is Light Energy Not Electrical Energy)
Inner Diameter Of Air Pipe: 7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle: 8mm)
Laser Wavelength: 455±5nm
Engraving Accuracy: 0.01mm
Engraving Area Size: 410x400mm
Focusing Method: Fixed Focus + Sliding Device
Laser Protection Cover: Equipped With a Detachable Laser Cover To Protect The Eyes. You Can Adjust It Up And Down, Or Remove The Cover
Machine Power Consumption: About 36W (Not Related To Engraving Or Cutting Performance, Just Power Consumption)
Engraving/Cutting Materials:
Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High Density Wood), MDF, Bamboo, Cardboard, Plastic, Leather, PCB Board, Alumina, 304 Stainless Steel, Ceramic, Dark Stone
Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Acrylic, Cardboard, Bamboo, Some Plastic Boards, Leather, PCB Boards
Laser Software: LASERGRBL, LIGHTBURN, LASERGRBL, LIGHTBURN, BENBOX, GRBLCONTROLLER, LITEFIRE
Support System: Support MAC, Windows System
Supported File Formats: NC, BMP, JPG, PNG, DXF And Other Image Formats
Data Transfer Method: USB Connection
Power Input: 100-240V AC, 50/60hz; Output: 12V 5A
Product Weight: 3.42kg
Packing Weight: 5.13kg/11.3lb
Packing Size: 600 x 345 x 130mm/23.6 x 13.6 x 5.1in 

Model: SCULPFUN 30L/Min Air Pump
Voltage: 200-240V
Power: 16W
Maximum air pressure: 0.03Mpa
Outlet diameter: 8mm

Model: SCULPFUN Rotary Roller
Product Size: 27x22x5cm

Notes:
●Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
●Do not touch the laser with your hands, otherwise you may burn your hands.
●Please avoid strong impact on the machine.
●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

Packing List:
1 x X-Axis Assembly
2 x X Profiles
2 x Y Profiles
1 x Control Box Assembly
3 x Support Feet
1 x S10 Laser
1 x 12V 5A Power Adapter
1 x Power Cord
1 x USB Cable
1 x Air Tube
3 x Tool Bag
1 x Laser Goggles
1 x Test Wood Board
1 x A4 Size Metal Pad
Step 1-6 Install The Package
1 x User Manual

 1× Roller Device
1× A Type Wiring
1× B Type Wiring
4× Raise Feet
1× Screw Bag
1× Soft Ruler
1× User Manual

1 x Air Pump
1 x Accessory Pack