Atomstack Maker A10 V2 10W Laser Engraver with FB2 Foldable Protective Cover and D2 Air Cleaner ( Item#: C-OS03569-4 )

Features:
♦ High Speed Laser Engraver: Engraving speed is increased by 2 times: using the latest technology, it can realize 24000mm/min high-speed engraving, and the speed is increased by 2 times. Whether you are a manufacturing industry or an individual user, our products can meet your needs, improve work efficiency and shorten production time. 400x400mm large working area provides boundless creative space.
♦ New structure: The linear slide rail + tank chain design enhances the structural accuracy and optimizes the wiring harness arrangement, thereby improving the accuracy and stability of the product. This design can also reduce the noise and vibration of the machine, providing a better working environment.
♦ High Accuracy: New 50mm long focal length light source, leading cutting ability. Not only can the cutting efficiency be improved, but also the cutting quality and precision can be enhanced. 
♦ New Focusing Device: Adjust the focal length more accurate: equipped with a new focusing device, you can adjust the focal length more accurate. This design can not only improve the cutting quality, but also make the cutting easier and more convenient. In addition, our focusing devices can be adapted to different thicknesses of materials.
♦ The second-generation APP control: Adopts the second-generation APP control, including cutting model material library, rich design functions and stable connection control. This design allows users to operate the laser cutting machine more conveniently, improving work efficiency and cutting quality.
♦ Upgraded dual compression spot coupling technology: the ultra-fine laser focus area is reduced to 0.06*0.06mm, and the high-density laser can easily cut 18mm balsa wood, 13mm paulownia wood, 6mm basswood plywood and 15mm thick black acrylic; it can directly engrave mirror stainless steel, ceramics, glass, etc., the engraving & cutting speed is 40% higher than that of the non-spot compression model, which is comparable to the effect of a 150W CO₂ laser engraving machine.
♦ Excellent Engraving and Cutting Ability: 10-12W laser power. Great for carving basswood pine paulownia, plywood, yellow peach, aluminum oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics; And cutting cork, low-density foam board, non-transparent acrylic and so on.
♦ Extensive Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, and also supports MAc system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc.
♦ Safety Protection: The new panoramic filter protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you can watch the laser without wearing goggles Sculpture. Reduce your goggle expense and inconvenience of wearing goggles.
♦ Strong Expandability: You can choose to add a type of protective box, rotating shaft accessories, purifiers, extension shafts, cameras, cross laser positioning, flame detection modules, horizontal gyroscopes and other accessories are optional (purchase separately).

Multi-layer Material: The Protective Box is composed of 3 layers including 900D oxford cloth, honeycomb and flame retardant cloth (with silicone coating), lightweight, high density and fireproof.
Extended Smoke Pipe: The smoke exhaust pipe can shrink to 50cm at the shortest and stretch to 2m at the longest. It's convenient to pull the pipe to the open space for smoke exhaust.
Large Space: FB2 protective box area up to 760x730x400mm/29.9x28.7x15.7in, large enough to compatible with 99% semiconductor laser engravers in the market.
Smooth Air Inlet And Outlet Design: With enlarge air inlet, which greatly improve the efficiency of air circulation in the box and avoid low pressure effects. 
Open to Use: The box is foldable and easy to store, and portable to carry to the school, office, studio, etc. Any problem, please contact our store without hesitation. Honor to serve you.

1. Designed for laser cutting: Atomstack Maker D2 air purifier, a 8-layer filter element specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.97% (atomstack laboratory test data).
2. Contribute to environmental protection: Discharging the cutting waste gas directly into the atmosphere will cause more pollution, so use an air purifier to make the air fresh.
3. Healthy creation: use the atomstack maker air purifier, and say goodbye to all polluting gases: PM2.5/PM10/formaldehyde/TVOC, etc. Health is priceless, for the health of you and your family, please do a good job of safety protection.
4. Break through the limitations of the working environment: no longer need to worry about the laser cutting workplace, use the protective cover and air purifier of atomstack maker, no need to worry about smoke exhaust and air pollution, you can work safely in your garage, basement, or workshop.
5. Long life: a single filter element can be used for about 3 hours a day in normal laser cutting wood board, and can work continuously for 3 months, and the single continuous working time can reach 200H, giving you long-term efficient protection.
6. Easy to replace: just 3 steps, no need to disassemble the circuit, and quickly replace the filter element in five minutes;
7. High adaptability: the atomstack maker purifier can be adapted to all protective box products of Atomstack, Ortur, NEJE, xtool and other brands.

Specification:
Product model: ATOMSTACK Maker A10 V2
Engraving size: 400*400mm

Laser power: 50W
Laser output optical power: 10-12W
Laser wavelength: 455±5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no focusing
Laser focus: 0.05*0.05mm
Product material: circuit board V/PWM modulation board
Wire: 22#2P2.54 terminal reverse wire 80mm
Optical lens: φ6/glass
Fan: 12V
Laser Beam Mode: Spot
Working mode: pulse work
Spot size: 0.05*0.05mm
Working time: 10000H
Working temperature: 0℃~70℃
Storage temperature: -40℃~85℃
Sintering temperature: 800°C

Engravable/cuttable materials
Carving material: Basswood pine paulownia, plywood, yellow peach, mahogany, bamboo, kraft paper, plastic, leather, PCB board, aluminum oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, rock plate, Density board, kraft paper, non-transparent acrylic board, resin, artificial bovine bone, rubber, high-density foam board, oil painting paper, A4 paper, leaves, etc.
Cutting material: Kraft paper, non-woven fabric, hardwood, paulownia, basswood, pine, less than 2MM bamboo, cork, low-density foam board, non-transparent acrylic, less than 2MM thick ABS, PP and other plastic sheets, sponge, etc.
Laser protective cover: there is a protective cover on the laser to protect the user's eyes, no need to wear additional protective glasses. At the same time prevent pets from grabbing the laser point

Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system
Supported file formats NC, BMP, JPG, PNG, DXF,
Data transmission method: USB connection
Power supply: 100-240V AC, 50/60HZ Output: 12V 5A

Machine Size: 641*565*218mm/25.5x22.2x8.5in (L*W*H)
Machine Weight: 4KG

Model: FB2
Product Size: 740x760x420mm/29.1x29.9x16.5in
Work Area: 760x730x400mm/29.9x28.7x15.7in
Voltage: 100-240V (US/UK/EU/AU)

Model: D2
Brand: Atomstack Maker
Size: 9.5x10.6x15.9"/240x269x404mm
Power supply: 5V 1A
Noise Level: 450≤dB
Air Flow: 255m³/h
Voltage: 100-240V

Precautions:
●Before operating the laser engraving machine, please read the manual carefully.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
●Do not touch the laser with your hands, or you may burn your hands.
●Please avoid strong impact on the machine.
●Children under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision.
●Do not apply the laser directly to any specular reflective objects, which may cause injury to the operator or burn the laser. 
●Transparent acrylic cannot be engraved directly.

Packing List:
1 x ATOMSTACK Maker A10 V2 Laser Engraver
1 x Mounting screw
1 x tool bag
4 x foot pad foam
3 x acrylic sheet
3 x wood chips
10 x wire tie
1 x desiccant
1 x brush
1 x clean cloth
1 x power adapter
1 x glasses
1 x manual
1x data cable
1 x laser module
1 x X-axis assembly
1 x Y axis left profile
1 x Y axis right profile
1 x profile on the base
1 x Base lower profile
3 x foot bracket

1 x protective box
1 x Exhaust hose
1 x Metal mesh cover
1 x Exhaust fan
1 x DC12V power supply
4 x M4*50 screws&Nut combination
1 x throat Hoop
1 x Flange Fan
1 x H3 Allen Key
1 x Flat-blade Screwdriver

1 x Air Purifier